
Home > Product > Drone Jammer Module > 30W > 30W 2010-2170MHz Drone Jammer Module | Analog Jamming Module
30W High-Power Drone Jamming Module (2010~2170MHz) – Analog Interference Module This high-performance 30W drone jamming module is engineered for reliable and effective radio frequency intervention w……
This high-performance 30W drone jamming module is engineered for reliable and effective radio frequency intervention within the 2010MHz to 2170MHz spectrum. Integrating an analog sweep interference source in a compact, single unit, it is designed for integration into Counter-Unmanned Aerial System (CUAS) and security solutions requiring robust signal disruption capabilities.
High Output Power: 30W nominal power provides effective jamming coverage.
Broad Target Band: Covers the critical 2010–2170MHz range, commonly used for drone control and video transmission.
Integrated Sweep Source: Built-in high-speed analog sweep generator ensures dynamic and wideband interference.
High Efficiency: ≥40% power efficiency optimizes thermal performance and reduces power supply demands.
Compact & Lightweight: Small form factor (115.5 x 46.5 x 21 mm) and low weight (0.21 kg) enable flexible integration into portable or fixed systems.
Simple Control: Easy TTL-level switch control (High/Open to enable, Ground to disable).
The table below summarizes the core electrical and mechanical parameters of the interference module.
| Parameter | Typical Value / Specification |
|---|---|
| Frequency Range | 2010 ~ 2170 MHz |
| RF Output Power | 30 W |
| Output VSWR | ≤ 2.0 |
| Operating Voltage | DC 24V ~ 29V |
| Maximum Operating Current | 3.2 A |
| Power Efficiency | ≥ 40% |
| Switch Control | +5V or Open = ON / Ground = OFF |
| RF Output Connector | SMA Female |
| Jamming Source Type | Built-in High-Speed Sweep Generator |
| Dimensions (LWH) | 115.5 * 46.5 * 21 mm |
| Weight | 0.21 kg |
This module serves as a core component in various security and defense systems:
Integrated into portable, handheld drone countermeasure devices.
As a building block for multi-band, high-power stationary CUAS systems.
Security and privacy protection for sensitive facilities and events.
Research and development of electronic countermeasure technologies.
This module is designed for integration by qualified engineers and professionals.
Ensure proper heat dissipation in the final assembly due to the high RF output power.
Compliance with local radio frequency regulations and laws is the sole responsibility of the integrator and end-user.
The standard interface is an SMA female connector; ensure compatible RF cabling and antennas rated for the power and frequency range.
Disclaimer: This product is intended for authorized, legal countermeasure, security, and research purposes only. Users must comply with all applicable national and international laws governing RF device operation.
Related Products
Send Inquiry
86-13920737097
AddNo. 15, Rongyuan Road, Huayuan Industrial Park, Binhai Hi-tech Zone, Tianjin, China.
E-mailjackyjingtj@gmail.com
Copyright @ 2026 BNT PTE. LTD. No:84463
Copyright @ 2026 BNT PTE. LTD.
Copyright @ 2026BNT PTE. LTD.